分类列表
独立传动复卷机
  • 独立传动复卷机
  • 在线询价
    详细内容

    1.升速及降速时主机与后架、压花等同步性好,复卷速度得到提高,生产速度由原0-180米/分钟提升至0-230米/分钟。

    2.主机与压花、压纹、后架间不再需要传动链条、减速箱等机械传动。大大减少故障维修及机器调整时间。

    3. 用PLC异步伺服控制,从电机跟随主电机运转,复卷过程纸面张力的稳定。避免了链条传动开停机引起的纸面一松一紧所造成的纸面起皱,打孔节距波动、纸球松紧不一等缺陷。

    4. 各功能单元间张力调整通过触摸屏设定参数,操作方便快捷。

    5.退纸架采用墙板式结构(30mm),扎实美观。机底留空有利于纸尘的清理。

    ZQ-III Advantages of independent drive rewinding machine:

    Each function unit is controlled by an independent encoder motor, and PLC asynchronous servo control is used to follow the main motor from the motor.

    1. At the time of acceleration and speed reduction, the synchronization between the host and the rear frame, embossing, etc. is good, and the rewinding speed is improved. The production speed is increased from 0-180 m/min to 0-230 m/min.

    2. The main engine and embossing, embossing, and rear frame no longer require mechanical transmission such as transmission chains and speed reduction boxes. Reduce the time of repair and machine adjustment greatly.

    3. Using PLC asynchronous servo control, following the main motor from the motor, the paper tension of the rewinding process is stable. Avoiding the paper paper wrinkle caused by the opening and stopping of the chain drive, the pitch fluctuation of the punch, and the tightening of the paper ball are not the same defects.

    4. The tension adjustment between the functional units is convenient and quick through the touch screen setting parameters.

    5. The paper backing frame adopts a wallboard structure(30mm) and is solid and beautiful. Leaving the bottom of the machine empty is conducive to the cleaning of paper dust.



    型号(Model)

    ZQ-III-E250 1092

    ZQ-III-E250 1575

    ZQ-III-E250 1760

    ZQ-III-E250 2200

    ZQ-III-E250 2500

    ZQ-III-E250 2900

    原纸宽度

    (Max width of raw paper)

    1350mm

    1750mm

    2000mm

    2150mm

    2400mm

    2800mm

    设计速度

    (Design speed)

    0-250/m/min

    操作速度

    (Operation speed)

    0-230/m/min

    原纸最大外径

    (Max outer diameter of raw paper)

    1100mm,其他请注明(Others please specify)

    原纸纸芯内径

    (Inner diameter of raw paper core)

    3"76mm,其他请注明(Others please specify)

    成品外径

    (Outer diameter of finished product)

    90-145mm,其他请注明(Others please specify)

    成品纸芯外径

    (Outer diameter of finished product core)

    25-55mm,其他请注明(Others please specify)

    成品完成条件

    (Product finish condition)

    总长度/直径(Total length/diameter)

    主要传动力

    (Power)

    5.5~22KW变频速度(Varial frequency speed regulating)

    参数设定

    (Parameter setting)

    HMI触摸屏控制(Touch screen operation panel)

    编程控制器

    (Procedure control)

    PLC

    刹车

    (Brake)

    电子、气压控制(electric&pneumatic control)

    机械传动

    (Mechanical transmission)

    各部分用独立变频电机与同步带传动

    (Each part is driven by an independent frequency converter motor and a synchronous belt)

    气动系统

    (Pneumatic system)

    4匹空气压缩机,最小压力5KG/CM2PA,客户自备4HP

    (air compressor,which the min pressure is 5KG/CM2PA(supplied by user)

    打孔刀

    (Perforating blade)

    4片螺旋刀(4pcs spiral blades)

    打孔节距

    (Perforating Size)

    108mm+-2mm),请指定(Others please specify)

    可选项(Options)

    可调节打孔节距

    (Adjustable perforating Size)

    90~140mm/200~450mm/200~500mm

    无芯功能

    (Coreless function)

    生产无芯卷纸

    (Produce coreless roll)

    后架

    (Backstand)

    独立驱动墙板式后架,1~4

    (Independent motors,1~4plies)

    压花

    (Embossing)

    钢对胶辊、毛布辊、羊毛辊、钢辊、独立驱动

    (Embossing,steel to steel/felted/woolen/rubber,
    Independent drive

    上胶复合

    (Lamination)

    点对点/点对底/其他

    (Point to point/nested/others)

    压边纹

    (Edge-embossing)

    气囊式

    (Air bag type)

    压扁单元

    (Pressing unit)

    用于无芯纸

    (For coreless roll)

    上一篇:全自动修边封口复卷打孔机...
    下一篇:擦手纸机

    分享到

    XML 地图 | Sitemap 地图

    澳门新萄京最大平台|澳门新萄京app|澳门新萄京59533com|澳门新萄京网址3522|澳门新萄京手机版网址|澳门新萄京客户端下载|奥门新萄京8455|奥门新萄京 奥门第一电子游戏|奥门新萄京83855com|奥门新萄京8522|澳门新萄京8522|澳门新萄京官方网站|新萄京棋牌手机版2016|新萄京棋牌官网登录|新萄京棋牌app|新萄京棋牌手下载2016|澳门新萄京手机游戏|新萄京棋牌手机下载|奥门新萄京|澳门新萄京欢迎你|澳门新萄京5566com|新萄京棋牌手机版|澳门新萄京9820